how does a leaf hybrid sever connect to a hub hybrid server?

Help with EFnet related issues

Moderators: Website/Forum Admins, EFnet/Help Moderators

3698
Posts: 1
Joined: Tue Mar 27, 2007 2:38 pm

how does a leaf hybrid sever connect to a hub hybrid server?

Postby 3698 » Tue Aug 15, 2006 3:10 am

I just change the serverinfo{ } and connect{ }.Does it need more changes?

Could someone give me a example about how a server connects to another server? Thanks very much!


The ip of hub server is 10.11.12.18. The ip of leaf server is 10.11.12.19
The hub's conf is :

serverinfo {
/*
* name: the name of our server. This cannot be changed at runtime.
*/
name = "hybridircd";

/*
* sid: a server's unique ID. This is three characters long and must
* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
* a digit, followed by 2 alpha-numerical letters.
* NOTE: The letters must be capitalized. This cannot be changed at runtime.
*/
sid = "1AB";

/*
* description: the description of the server. '[' and ']' may not
* be used here for compatibility with older servers.
*/
description = "hybrid-7 test server";

/*
* network info: the name and description of the network this server
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
network_desc = "This is My Network";

/*
* hub: allow this server to act as a hub and have multiple servers
* connected to it. This may not be changed if there are active
* LazyLink servers.
*/
hub = yes;

/*
* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only, or "* for INADDR_ANY.
*/
#vhost = "192.169.0.1";

/*
* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only, or "* for INADDR_ANY.
*/
#vhost6 = "3ffe:80e8:546::2";

/* max_clients: the maximum number of clients allowed to connect */
max_clients = 512;

/*
* rsa key: the path to the file containing our rsa key for cryptlink.
*
* Example command to store a 2048 bit RSA keypair in
* rsa.key, and the public key in rsa.pub:
*
* openssl genrsa -out rsa.key 2048
* openssl rsa -in rsa.key -pubout -out rsa.pub
* chown <ircd>.<ircd> rsa.key rsa.pub
* chmod 0600 rsa.key
* chmod 0644 rsa.pub
*/
#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";

/*
* ssl certificate: the path to the file containing our ssl certificate
* for encrypted client connection.
*
* This assumes your private RSA key is stored in rsa.key. You
* MUST have an RSA key in order to generate the certificate
*
* openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
*
* See http://www.openssl.org/docs/HOWTO/certificates.txt
*
* Please use the following values when generating the cert
*
* Organization Name: Network Name
* Organization Unit Name: changme.someirc.net
* Common Name: irc.someirc.net
* E-mail: you@domain.com
*/
#ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
};

connect {
/* name: the name of the server */
name = "irc.uplink.com";

/*
* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
host = "192.168.0.1";

/*
* vhost: the IP to bind to when we connect outward to servers.
* serverinfo::vhost and serverinfo::vhost6 will be overridden
* by this directive.
*/
vhost = "192.168.0.2";

/*
* passwords: the passwords we send (OLD C and accept (OLD N.
* The remote server will have these passwords reversed.
*/
send_password = "haha";
accept_password = "haha";

/*
* encrypted: controls whether the accept_password above has been
* encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
*/
encrypted = no;

/* port: the port to connect to this server on */
port = 6666;

/*
* hub_mask: the mask of servers that this server may hub. Multiple
* entries are permitted
*/
hub_mask = "*";

/*
* leaf_mask: the mask of servers this server may not hub. Multiple
* entries are permitted. Useful for forbidding EU -> US -> EU routes.
*/
# leaf_mask = "*.uk";

/* fakename: the servername we pretend to be when we connect */
# fakename = "*.arpa";

/* class: the class this server is in */
class = "server";

/*
* autoconn: controls whether we autoconnect to this server or not,
* dependent on class limits. By default, this is disabled.
* compressed: controls whether traffic is compressed via ziplinks.
* By default, this is disabled
* lazylink: controls whether this server is a LazyLink. LazyLink
* servers may NOT hub. See doc/LazyLinks.txt
* cryptlink: enable full encryption for all data passing between our
* server and this link and rsa authentication.
* burst_away: This will send the /away string that users have set
* on the server burst. Note this can be a lot of data
* and slow down your server burst.
* topicburst: Send topics to this server during channel burst. Works
* only if the server we are connecting to is capable
* of TBURST/TB.
*/
# flags = autoconn, lazylink, compressed, cryptlink, burst_away, topicburst;
};
....

//////////////////////////////////////////////////////////////////////////////////

The leaf's conf is:

serverinfo {
/*
* name: the name of our server. This cannot be changed at runtime.
*/
name = "hybridircd";

/*
* sid: a server's unique ID. This is three characters long and must
* be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
* a digit, followed by 2 alpha-numerical letters.
* NOTE: The letters must be capitalized. This cannot be changed at runtime.
*/
sid = "1BB";

/*
* description: the description of the server. '[' and ']' may not
* be used here for compatibility with older servers.
*/
description = "hybrid-7 test server";

/*
* network info: the name and description of the network this server
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
network_desc = "This is My Network";

/*
* hub: allow this server to act as a hub and have multiple servers
* connected to it. This may not be changed if there are active
* LazyLink servers.
*/
hub = no;

....
}

connect {
/*
* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
host = "10.11.12.18";

/*
* vhost: the IP to bind to when we connect outward to servers.
* serverinfo::vhost and serverinfo::vhost6 will be overridden
* by this directive.
*/
vhost = "*";

/*
* passwords: the passwords we send (OLD C and accept (OLD N.
* The remote server will have these passwords reversed.
*/
send_password = "haha";
accept_password = "haha";

/*
* encrypted: controls whether the accept_password above has been
* encrypted. (OLD CRYPT_LINK_PASSWORD now optional per connect)
*/
encrypted = no;

/* port: the port to connect to this server on */
port = 6666;

/*
* hub_mask: the mask of servers that this server may hub. Multiple
* entries are permitted
*/
hub_mask = "*";

/*
* leaf_mask: the mask of servers this server may not hub. Multiple
* entries are permitted. Useful for forbidding EU -> US -> EU routes.
*/
# leaf_mask = "*.uk";

/* fakename: the servername we pretend to be when we connect */
# fakename = "*.arpa";

/* class: the class this server is in */
class = "server";

/*
* autoconn: controls whether we autoconnect to this server or not,
* dependent on class limits. By default, this is disabled.
* compressed: controls whether traffic is compressed via ziplinks.
* By default, this is disabled
* lazylink: controls whether this server is a LazyLink. LazyLink
* servers may NOT hub. See doc/LazyLinks.txt
* cryptlink: enable full encryption for all data passing between our
* server and this link and rsa authentication.
* burst_away: This will send the /away string that users have set
* on the server burst. Note this can be a lot of data
* and slow down your server burst.
* topicburst: Send topics to this server during channel burst. Works
* only if the server we are connecting to is capable
* of TBURST/TB.
*/
flags = autoconn;
};
3717
Posts: 5
Joined: Tue Mar 27, 2007 2:50 pm

Postby 3717 » Fri Aug 25, 2006 3:43 pm

is it too cruel to say you just aren't made to run an irc daemon ? :p

Who is online

Users browsing this forum: No registered users and 3 guests